Onboard Devices
SATA Configuration
SATA Configuration firmware setup page decoded from AMI HII/IFR resources.
- Form ID
- 0x27b0
- Records
- 92
- Parents
- PCH-IO Configuration
- Path
- Setup / Chipset / PCH-IO Configuration / SATA Configuration
Record 3145
SATA Controller(s)
Firmware Value
Enable/Disable SATA Device.
- Opcode
- OneOf
- Question ID
- 0xb8c
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x48
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
1 | Enabled | |
0 | Disabled |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 1 | Enabled |
Record 3146
SATA Mode Selection
Firmware Value
Determines how SATA controller(s) operate.
- Opcode
- OneOf
- Question ID
- 0xb8d
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x49
- Width
- 1 byte(s)
- Range
- 0 to 0 step 0
| Value | Label | Markers |
|---|---|---|
0 | AHCI | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3147
SATA Test Mode
Firmware Value
Test Mode Enable/Disable (Loop Back).
- Opcode
- OneOf
- Question ID
- 0xb8e
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x93
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
1 | Enabled | |
0 | Disabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3148
Aggressive LPM Support
Firmware Value
Enable PCH to aggressively enter link power state.
- Opcode
- OneOf
- Question ID
- 0xb8f
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x92
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1469, "type": "SuppressIf", "offset": 470451, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3149
Port 2
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xb90
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x4a
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1470, "type": "SuppressIf", "offset": 470521, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3150
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xb91
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x52
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1471, "type": "SuppressIf", "offset": 470566, "expr": ["EqIdVal QuestionId: 0xB92, Value: 0x1"]}
Record 3151
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xb92
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x6a
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3152
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xb93
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x5a
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1472, "type": "SuppressIf", "offset": 470650, "expr": ["EqIdVal QuestionId: 0xB91, Value: 0x0"]}
Record 3153
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xb94
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x62
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3154
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xb95
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x72
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3155
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xb96
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x7a
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | Standard defaultManufacturing default |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3156
SATA Port 0 DevSlp
Firmware Value
Enable/Disable SATA Port 0 DevSlp.
Firmware help text
Enable/Disable SATA Port 0 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xb97
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x94
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Disabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3157
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xb98
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x9c
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3158
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xb99
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa4
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1473, "type": "GrayOutIf", "offset": 470885, "expr": ["EqIdVal QuestionId: 0xB98, Value: 0x0"]}
Record 3159
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xb9a
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb4
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1473, "type": "GrayOutIf", "offset": 470885, "expr": ["EqIdVal QuestionId: 0xB98, Value: 0x0"]}
Record 3160
Port 1
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xb9b
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x4b
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1474, "type": "SuppressIf", "offset": 470965, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3161
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xb9c
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x53
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1475, "type": "SuppressIf", "offset": 471010, "expr": ["EqIdVal QuestionId: 0xB9D, Value: 0x1"]}
Record 3162
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xb9d
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x6b
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3163
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xb9e
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x5b
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1476, "type": "SuppressIf", "offset": 471094, "expr": ["EqIdVal QuestionId: 0xB9C, Value: 0x0"]}
Record 3164
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xb9f
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x63
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3165
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xba0
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x73
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3166
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xba1
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x7b
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Unknown |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3167
SATA Port 1 DevSlp
Firmware Value
Enable/Disable SATA Port 1 DevSlp.
Firmware help text
Enable/Disable SATA Port 1 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xba2
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x95
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Disabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3168
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xba3
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x9d
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3169
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xba4
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa6
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1477, "type": "GrayOutIf", "offset": 471335, "expr": ["EqIdVal QuestionId: 0xBA3, Value: 0x0"]}
Record 3170
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xba5
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb5
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1477, "type": "GrayOutIf", "offset": 471335, "expr": ["EqIdVal QuestionId: 0xBA3, Value: 0x0"]}
Record 3171
Port 2
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xba6
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x4c
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1478, "type": "SuppressIf", "offset": 471415, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3172
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xba7
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x54
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1479, "type": "SuppressIf", "offset": 471460, "expr": ["EqIdVal QuestionId: 0xBA8, Value: 0x1"]}
Record 3173
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xba8
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x6c
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3174
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xba9
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x5c
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1480, "type": "SuppressIf", "offset": 471544, "expr": ["EqIdVal QuestionId: 0xBA7, Value: 0x0"]}
Record 3175
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xbaa
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x64
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3176
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xbab
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x74
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3177
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xbac
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x7c
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Unknown |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3178
SATA Port 2 DevSlp
Firmware Value
Enable/Disable SATA Port 2 DevSlp.
Firmware help text
Enable/Disable SATA Port 2 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xbad
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x96
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Disabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3179
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xbae
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x9e
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
Record 3180
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xbaf
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa8
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | Other |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1481, "type": "GrayOutIf", "offset": 471785, "expr": ["EqIdVal QuestionId: 0xBAE, Value: 0x0"]}
Record 3181
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xbb0
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb6
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1481, "type": "GrayOutIf", "offset": 471785, "expr": ["EqIdVal QuestionId: 0xBAE, Value: 0x0", "Value", "Uint64 Value: 0x271"]}
Record 3182
Port 3
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xbb1
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x4d
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1483, "type": "SuppressIf", "offset": 471891, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3183
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xbb2
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x55
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1484, "type": "SuppressIf", "offset": 471936, "expr": ["EqIdVal QuestionId: 0xBB3, Value: 0x1"]}
Record 3184
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xbb3
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x6d
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3185
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xbb4
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x5d
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1485, "type": "SuppressIf", "offset": 472020, "expr": ["EqIdVal QuestionId: 0xBB2, Value: 0x0"]}
Record 3186
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xbb5
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x65
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3187
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xbb6
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x75
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3188
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xbb7
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x7d
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Unknown |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3189
SATA Port 3 DevSlp
Firmware Value
Enable/Disable SATA Port 3 DevSlp.
Firmware help text
Enable/Disable SATA Port 3 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xbb8
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x97
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3190
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xbb9
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x9f
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3191
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xbba
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xaa
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1486, "type": "GrayOutIf", "offset": 472255, "expr": ["EqIdVal QuestionId: 0xBB9, Value: 0x0"]}
Record 3192
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xbbb
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb7
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1486, "type": "GrayOutIf", "offset": 472255, "expr": ["EqIdVal QuestionId: 0xBB9, Value: 0x0"]}
Record 3193
Port 1
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xbbc
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x4e
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1487, "type": "SuppressIf", "offset": 472335, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3194
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xbbd
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x56
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1488, "type": "SuppressIf", "offset": 472380, "expr": ["EqIdVal QuestionId: 0xBBE, Value: 0x1"]}
Record 3195
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xbbe
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x6e
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3196
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xbbf
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x5e
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1489, "type": "SuppressIf", "offset": 472464, "expr": ["EqIdVal QuestionId: 0xBBD, Value: 0x0"]}
Record 3197
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xbc0
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x66
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3198
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xbc1
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x76
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3199
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xbc2
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x7e
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 0 | Unknown |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3200
SATA Port 4 DevSlp
Firmware Value
Enable/Disable SATA Port 4 DevSlp.
Firmware help text
Enable/Disable SATA Port 4 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xbc3
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x98
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3201
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xbc4
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa0
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3202
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xbc5
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xac
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1490, "type": "GrayOutIf", "offset": 472699, "expr": ["EqIdVal QuestionId: 0xBC4, Value: 0x0"]}
Record 3203
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xbc6
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb8
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1490, "type": "GrayOutIf", "offset": 472699, "expr": ["EqIdVal QuestionId: 0xBC4, Value: 0x0"]}
Record 3204
Port 2
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xbc7
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x4f
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1491, "type": "SuppressIf", "offset": 472779, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3205
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xbc8
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x57
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1492, "type": "SuppressIf", "offset": 472824, "expr": ["EqIdVal QuestionId: 0xBC9, Value: 0x1"]}
Record 3206
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xbc9
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x6f
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3207
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xbca
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x5f
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1493, "type": "SuppressIf", "offset": 472908, "expr": ["EqIdVal QuestionId: 0xBC8, Value: 0x0"]}
Record 3208
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xbcb
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x67
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3209
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xbcc
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x77
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3210
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xbcd
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x7f
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | Standard defaultManufacturing default |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3211
SATA Port 5 DevSlp
Firmware Value
Enable/Disable SATA Port 5 DevSlp.
Firmware help text
Enable/Disable SATA Port 5 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xbce
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x99
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3212
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xbcf
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa1
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3213
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xbd0
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xae
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1494, "type": "GrayOutIf", "offset": 473137, "expr": ["EqIdVal QuestionId: 0xBCF, Value: 0x0"]}
Record 3214
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xbd1
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb9
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1494, "type": "GrayOutIf", "offset": 473137, "expr": ["EqIdVal QuestionId: 0xBCF, Value: 0x0"]}
Record 3215
Port 3
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xbd2
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x50
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1495, "type": "SuppressIf", "offset": 473217, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3216
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xbd3
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x58
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1496, "type": "SuppressIf", "offset": 473262, "expr": ["EqIdVal QuestionId: 0xBD4, Value: 0x1"]}
Record 3217
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xbd4
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x70
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3218
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xbd5
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x60
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1497, "type": "SuppressIf", "offset": 473346, "expr": ["EqIdVal QuestionId: 0xBD3, Value: 0x0"]}
Record 3219
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xbd6
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x68
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3220
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xbd7
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x78
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3221
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xbd8
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x80
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | Standard defaultManufacturing default |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3222
SATA Port 6 DevSlp
Firmware Value
Enable/Disable SATA Port 6 DevSlp.
Firmware help text
Enable/Disable SATA Port 6 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xbd9
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x9a
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3223
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xbda
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa2
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3224
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xbdb
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb0
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1498, "type": "GrayOutIf", "offset": 473575, "expr": ["EqIdVal QuestionId: 0xBDA, Value: 0x0"]}
Record 3225
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xbdc
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xba
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1498, "type": "GrayOutIf", "offset": 473575, "expr": ["EqIdVal QuestionId: 0xBDA, Value: 0x0"]}
Record 3226
Port 4
Firmware Value
Enable or Disable SATA Port
- Opcode
- OneOf
- Question ID
- 0xbdd
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x51
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1499, "type": "SuppressIf", "offset": 473655, "expr": ["EqIdValList QuestionId: 0xB8E, Values: [1]"]}
Record 3227
Hot Plug
Firmware Value
Designates this port as Hot Pluggable.
- Opcode
- OneOf
- Question ID
- 0xbde
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x59
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1500, "type": "SuppressIf", "offset": 473700, "expr": ["EqIdVal QuestionId: 0xBDF, Value: 0x1"]}
Record 3228
External
Firmware Value
Marks this port as external.
- Opcode
- OneOf
- Question ID
- 0xbdf
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x71
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3229
Mechanical Presence Switch
Firmware Value
Controls reporting if this port has an Mechanical Presence Switch.
Firmware help text
Controls reporting if this port has an Mechanical Presence Switch. Note: Requires hardware support.
- Opcode
- OneOf
- Question ID
- 0xbe0
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x61
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard default |
1 | Enabled | Standard defaultManufacturing default |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1501, "type": "SuppressIf", "offset": 473784, "expr": ["EqIdVal QuestionId: 0xBDE, Value: 0x0"]}
Record 3230
Spin Up Device
Firmware Value
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot.
Firmware help text
If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot.
- Opcode
- OneOf
- Question ID
- 0xbe1
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x69
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3231
SATA Device Type
Firmware Value
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive
- Opcode
- OneOf
- Question ID
- 0xbe2
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x79
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Hard Disk Drive | Standard defaultManufacturing default |
1 | Solid State Drive |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3232
Topology
Firmware Value
Identify the SATA Topology if it is Default or ISATA or Flex or DirectConnect or M2
- Opcode
- OneOf
- Question ID
- 0xbe3
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x81
- Width
- 1 byte(s)
- Range
- 0 to 4 step 0
| Value | Label | Markers |
|---|---|---|
0 | Unknown | Standard defaultManufacturing default |
1 | ISATA | |
2 | Direct Connect | |
3 | Flex | |
4 | M2 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3233
SATA Port 7 DevSlp
Firmware Value
Enable/Disable SATA Port 7 DevSlp.
Firmware help text
Enable/Disable SATA Port 7 DevSlp. For DevSlp to work, both hard drive and SATA port need to support DevSlp function, otherwise an unexpected behavior might happen. Please check board design before enabling it.
- Opcode
- OneOf
- Question ID
- 0xbe4
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0x9b
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3234
DITO Configuration
Firmware Value
Enable/Disable DITO Configuration
- Opcode
- OneOf
- Question ID
- 0xbe5
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xa3
- Width
- 1 byte(s)
- Range
- 0 to 1 step 0
| Value | Label | Markers |
|---|---|---|
0 | Disabled | Standard defaultManufacturing default |
1 | Enabled |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
Record 3235
DITO Value
Firmware Value
DITO Value
- Opcode
- Numeric
- Question ID
- 0xbe6
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xb2
- Width
- 2 byte(s)
- Range
- 0 to 1023 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 625 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1502, "type": "GrayOutIf", "offset": 474013, "expr": ["EqIdVal QuestionId: 0xBE5, Value: 0x0"]}
Record 3236
DM Value
Firmware Value
DM Value
- Opcode
- Numeric
- Question ID
- 0xbe7
- VarStore
- PchSetup
- VarStore GUID
- 4570B7F1-ADE8-4943-8DC3-406472842384
- Offset
- 0xbb
- Width
- 1 byte(s)
- Range
- 0 to 15 step 0
Default store records
| Store ID | Store label | Value | Option label |
|---|---|---|---|
0 | Standard | 15 |
Visibility / conditions
- {"condition_id": 1468, "type": "SuppressIf", "offset": 470384, "expr": ["EqIdVal QuestionId: 0xB8C, Value: 0x0"]}
- {"condition_id": 1482, "type": "SuppressIf", "offset": 471863, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}
- {"condition_id": 1502, "type": "GrayOutIf", "offset": 474013, "expr": ["EqIdVal QuestionId: 0xBE5, Value: 0x0"]}