Onboard Devices

USB Configuration

USB Configuration firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x27af
Records: 33
Parents: PCH-IO Configuration
Path: Setup / Chipset / PCH-IO Configuration / USB Configuration

Record 3112

xDCI Support

Firmware Value

Enable/Disable xDCI (USB OTG Device).

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb6b
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x47
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`	Disabled

Permalink

Record 3113

USB2 PHY Sus Well Power Gating

Firmware Value

Select 'Enabled' to enable SUS Well PG for USB2 PHY.

Firmware help text

Select 'Enabled' to enable SUS Well PG for USB2 PHY. This option has no effect on PCH-H

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb6c
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x46
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 3114

USB PDO Programming

Firmware Value

Select 'Enabled' if Port Disable Override functionality is used.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb6d
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x42
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 3115

USB Overcurrent

Firmware Value

Select 'Disabled' for pin-based debug.

Firmware help text

Select 'Disabled' for pin-based debug. If pin-based debug is enabled but USB overcurrent is not disabled, USB DbC does not work.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb6e
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x43
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 3116

USB Overcurrent Lock

Firmware Value

Select 'Enabled' if Overcurrent functionality is used.

Firmware help text

Select 'Enabled' if Overcurrent functionality is used. Enabling this will make xHCI controller consume the Overcurrent mapping data

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb6f
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x44
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 3117

USB Audio Offload

Firmware Value

Enable/Disable USB Audio Offload functionality

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb70
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x783
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 3118

Enable HSII on xHCI

Firmware Value

Enable/Disable HSII feature.

Firmware help text

Enable/Disable HSII feature. It may lead to increased power consumption.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb71
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x7f4
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 3119

USB Port Disable Override

Firmware Value

Selectively Enable/Disable the corresponding USB port from reporting a Device Connection to the controller.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb72
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x27
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disable Link
`1`	Select Per-Pin

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`	Disable Link

Permalink

Record 3120

USB SS Physical Connector #0

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb73
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x38
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1443, "type": "SuppressIf", "offset": 469109, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x0", "LessEqual"]}

Permalink

Record 3121

USB SS Physical Connector #1

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb74
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x39
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1444, "type": "SuppressIf", "offset": 469157, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x1", "LessEqual"]}

Permalink

Record 3122

USB SS Physical Connector #2

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb75
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x3a
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1445, "type": "SuppressIf", "offset": 469205, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x2", "LessEqual"]}

Permalink

Record 3123

USB SS Physical Connector #3

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb76
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x3b
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1446, "type": "SuppressIf", "offset": 469253, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x3", "LessEqual"]}

Permalink

Record 3124

USB SS Physical Connector #4

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb77
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x3c
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1447, "type": "SuppressIf", "offset": 469301, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x4", "LessEqual"]}

Permalink

Record 3125

USB SS Physical Connector #5

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb78
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x3d
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1448, "type": "SuppressIf", "offset": 469349, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x5", "LessEqual"]}

Permalink

Record 3126

USB SS Physical Connector #6

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb79
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x3e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1449, "type": "SuppressIf", "offset": 469397, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x6", "LessEqual"]}

Permalink

Record 3127

USB SS Physical Connector #7

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb7a
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x3f
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1450, "type": "SuppressIf", "offset": 469445, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x7", "LessEqual"]}

Permalink

Record 3128

USB SS Physical Connector #8

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb7b
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x40
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1451, "type": "SuppressIf", "offset": 469493, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x8", "LessEqual"]}

Permalink

Record 3129

USB SS Physical Connector #9

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb7c
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x41
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1452, "type": "SuppressIf", "offset": 469541, "expr": ["QuestionRef1 QuestionId: 0x119E", "Uint8 Value: 0x9", "LessEqual"]}

Permalink

Record 3130

USB HS Physical Connector #0

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb7d
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x28
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1453, "type": "SuppressIf", "offset": 469589, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x0", "LessEqual"]}

Permalink

Record 3131

USB HS Physical Connector #1

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb7e
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x29
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1454, "type": "SuppressIf", "offset": 469637, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x1", "LessEqual"]}

Permalink

Record 3132

USB HS Physical Connector #2

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb7f
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x2a
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1455, "type": "SuppressIf", "offset": 469685, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x2", "LessEqual"]}

Permalink

Record 3133

USB HS Physical Connector #3

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb80
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x2b
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1456, "type": "SuppressIf", "offset": 469733, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x3", "LessEqual"]}

Permalink

Record 3134

USB HS Physical Connector #4

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb81
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x2c
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1457, "type": "SuppressIf", "offset": 469781, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x4", "LessEqual"]}

Permalink

Record 3135

USB HS Physical Connector #5

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb82
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x2d
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1458, "type": "SuppressIf", "offset": 469829, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x5", "LessEqual"]}

Permalink

Record 3136

USB HS Physical Connector #6

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb83
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x2e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1459, "type": "SuppressIf", "offset": 469877, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x6", "LessEqual"]}

Permalink

Record 3137

USB HS Physical Connector #7

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb84
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x2f
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1460, "type": "SuppressIf", "offset": 469925, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x7", "LessEqual"]}

Permalink

Record 3138

USB HS Physical Connector #8

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb85
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x30
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1461, "type": "SuppressIf", "offset": 469973, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x8", "LessEqual"]}

Permalink

Record 3139

USB HS Physical Connector #9

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb86
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x31
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1462, "type": "SuppressIf", "offset": 470021, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0x9", "LessEqual"]}

Permalink

Record 3140

USB HS Physical Connector #10

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb87
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x32
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1463, "type": "SuppressIf", "offset": 470069, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0xA", "LessEqual"]}

Permalink

Record 3141

USB HS Physical Connector #11

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb88
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x33
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1464, "type": "SuppressIf", "offset": 470117, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0xB", "LessEqual"]}

Permalink

Record 3142

USB HS Physical Connector #12

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb89
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x34
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1465, "type": "SuppressIf", "offset": 470165, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0xC", "LessEqual"]}

Permalink

Record 3143

USB HS Physical Connector #13

Firmware Value

Enable/Disable this USB Physical Connector (physical port).

Firmware help text

Enable/Disable this USB Physical Connector (physical port). Once disabled, any USB devices plug into the connector will not be detected by BIOS or OS.

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb8a
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x35
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1442, "type": "SuppressIf", "offset": 469101, "expr": ["EqIdVal QuestionId: 0xB72, Value: 0x0"]}
{"condition_id": 1466, "type": "SuppressIf", "offset": 470213, "expr": ["QuestionRef1 QuestionId: 0x119D", "Uint8 Value: 0xD", "LessEqual"]}

Permalink

Record 3144

USB Sensor Hub

Firmware Value

USB Sensor Hub enable/disable

Form: USB Configuration
Opcode: OneOf
Question ID: 0xb8b
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x6e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`1`	Enabled
`0`	Disabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1467, "type": "SuppressIf", "offset": 470263, "expr": ["EqIdVal QuestionId: 0xB24, Value: 0x2", "Not"]}

Permalink