CPU, Power, Memory

Config TDP Configurations

Config TDP Configurations firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x2769
Records: 16
Parents: CPU - Power Management Control
Path: Setup / Advanced / Power & Performance / CPU - Power Management Control / Config TDP Configurations / Setup / Advanced / Advanced / Power & Performance / CPU - Power Management Control / Config TDP Configurations

Record 891

Enable Configurable TDP

Firmware Value

Applies Configurable Processor Base Power (cTDP) initialization settings based on non-cTDP or cTDP.

Firmware help text

Applies Configurable Processor Base Power (cTDP) initialization settings based on non-cTDP or cTDP. Default is 1: Applies to cTDP; if 0 then applies non-cTDP and BIOS will bypass cTDP initialzation flow

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x316
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x227
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Applies to non-cTDP
`1`	Applies to cTDP	Standard defaultManufacturing default

Permalink

Record 892

Configurable TDP Boot Mode

Firmware Value

Configurable Processor Base Power (cTDP) Mode as Nominal/Level/Leve2/Deactivate TDP selection.

Firmware help text

Configurable Processor Base Power (cTDP) Mode as Nominal/Level/Leve2/Deactivate TDP selection. Deactivate option will set MSR to Nominal and MMIO to Zero.

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x317
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x44
Width: 1 byte(s)
Range: 0 to 255 step 0

Value	Label	Markers
`0`	Nominal	Standard defaultManufacturing default
`1`	Level1
`2`	Level2
`255`	Deactivate

Permalink

Record 893

Configurable TDP Lock

Firmware Value

Configurable Processor Base Power (cTDP) Mode Lock sets the Lock bits on TURBO_ACTIVATION_RATIO and CONFIG_TDP_CONTROL.

Firmware help text

Configurable Processor Base Power (cTDP) Mode Lock sets the Lock bits on TURBO_ACTIVATION_RATIO and CONFIG_TDP_CONTROL. Note: When CTDP Lock is enabled Custom ConfigTDP Count will be forced to 1 and Custom ConfigTDP Boot Index will be forced to 0.

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x318
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x45
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`1`	Enabled
`0`	Disabled	Standard defaultManufacturing default

Permalink

Record 894

CTDP BIOS control

Firmware Value

Enables Configurable Processor Base Power (cTDP) control via runtime ACPI BIOS methods.

Firmware help text

Enables Configurable Processor Base Power (cTDP) control via runtime ACPI BIOS methods. This

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x319
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x46
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`1`	Enabled
`0`	Disabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 335, "type": "SuppressIf", "offset": 354359, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1", "EqIdVal QuestionId: 0x375, Value: 0x1", "Or"]}

Permalink

Record 895

Power Limit 1

Firmware Value

Power Limit 1 in Milli Watts.

Firmware help text

Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. 0 = no custom override. For 12.50W, enter 12500. Overclocking SKU: Value must be between Max and Min Power Limits (specified by PACKAGE_POWER_SKU_MSR). Other SKUs: This value must be between Min Power Limit and Processor Base Power (TDP) Limit.

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x31a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x5b
Width: 4 byte(s)
Range: 0 to 4095875 step 125

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`95000`

Visibility / conditions

{"condition_id": 336, "type": "GrayOutIf", "offset": 354470, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 896

Power Limit 2

Firmware Value

Power Limit 2 value in Milli Watts.

Firmware help text

Power Limit 2 value in Milli Watts. BIOS will round to the nearest 1/8W when programming. 0 = no custom override. For 12.50W, enter 12500. Processor applies control policies such that the package power does not exceed this limit.

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x31b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x5f
Width: 4 byte(s)
Range: 0 to 4095875 step 125

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`168000`

Visibility / conditions

{"condition_id": 336, "type": "GrayOutIf", "offset": 354470, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 897

Power Limit 1 Time Window

Firmware Value

Power Limit 1 Time Window value in seconds.

Firmware help text

Power Limit 1 Time Window value in seconds. The value may vary from 0 to 128. 0 = default value (28 sec for Mobile and 8 sec for Desktop). Defines time window which Processor Base Power (TDP) value should be maintained.

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x31c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x63
Width: 1 byte(s)
Range: 0 to 128 step 0

Value	Label	Markers
`0`	0
`1`	1
`2`	2
`3`	3
`4`	4
`5`	5
`6`	6
`7`	7
`8`	8
`10`	10
`12`	12
`14`	14
`16`	16
`20`	20
`24`	24
`28`	28
`32`	32
`40`	40
`48`	48
`56`	56
`64`	64
`80`	80
`96`	96
`112`	112
`128`	128

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`1`	1

Visibility / conditions

{"condition_id": 336, "type": "GrayOutIf", "offset": 354470, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 898

ConfigTDP Turbo Activation Ratio

Firmware Value

Custom value for Turbo Activation Ratio.

Firmware help text

Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo. 0 means don't use custom value.

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x31d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x64
Width: 1 byte(s)
Range: 0 to 255 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 336, "type": "GrayOutIf", "offset": 354470, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 899

Power Limit 1

Firmware Value

Power Limit 1 in Milli Watts.

Firmware help text

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x31e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x65
Width: 4 byte(s)
Range: 0 to 4095875 step 125

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 337, "type": "SuppressIf", "offset": 354779, "expr": ["EqIdVal QuestionId: 0x1285, Value: 0x0"]}
{"condition_id": 338, "type": "GrayOutIf", "offset": 354813, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 900

Power Limit 2

Firmware Value

Power Limit 2 value in Milli Watts.

Firmware help text

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x31f
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x69
Width: 4 byte(s)
Range: 0 to 4095875 step 125

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 337, "type": "SuppressIf", "offset": 354779, "expr": ["EqIdVal QuestionId: 0x1285, Value: 0x0"]}
{"condition_id": 338, "type": "GrayOutIf", "offset": 354813, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 901

Power Limit 1 Time Window

Firmware Value

Power Limit 1 Time Window value in seconds.

Firmware help text

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x320
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x6d
Width: 1 byte(s)
Range: 0 to 128 step 0

Value	Label	Markers
`0`	0
`1`	1
`2`	2
`3`	3
`4`	4
`5`	5
`6`	6
`7`	7
`8`	8
`10`	10
`12`	12
`14`	14
`16`	16
`20`	20
`24`	24
`28`	28
`32`	32
`40`	40
`48`	48
`56`	56
`64`	64
`80`	80
`96`	96
`112`	112
`128`	128

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`	0

Visibility / conditions

{"condition_id": 337, "type": "SuppressIf", "offset": 354779, "expr": ["EqIdVal QuestionId: 0x1285, Value: 0x0"]}
{"condition_id": 338, "type": "GrayOutIf", "offset": 354813, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 902

ConfigTDP Turbo Activation Ratio

Firmware Value

Custom value for Turbo Activation Ratio.

Firmware help text

Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo. 0 means don't use custom value.

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x321
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x6e
Width: 1 byte(s)
Range: 0 to 255 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 337, "type": "SuppressIf", "offset": 354779, "expr": ["EqIdVal QuestionId: 0x1285, Value: 0x0"]}
{"condition_id": 338, "type": "GrayOutIf", "offset": 354813, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 903

Power Limit 1

Firmware Value

Power Limit 1 in Milli Watts.

Firmware help text

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x322
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x6f
Width: 4 byte(s)
Range: 0 to 4095875 step 125

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 339, "type": "SuppressIf", "offset": 355124, "expr": ["EqIdVal QuestionId: 0x1284, Value: 0x0"]}
{"condition_id": 340, "type": "GrayOutIf", "offset": 355150, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 904

Power Limit 2

Firmware Value

Power Limit 2 value in Milli Watts.

Firmware help text

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x323
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x73
Width: 4 byte(s)
Range: 0 to 4095875 step 125

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 339, "type": "SuppressIf", "offset": 355124, "expr": ["EqIdVal QuestionId: 0x1284, Value: 0x0"]}
{"condition_id": 340, "type": "GrayOutIf", "offset": 355150, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 905

Power Limit 1 Time Window

Firmware Value

Power Limit 1 Time Window value in seconds.

Firmware help text

Form: Config TDP Configurations
Opcode: OneOf
Question ID: 0x324
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x77
Width: 1 byte(s)
Range: 0 to 128 step 0

Value	Label	Markers
`0`	0
`1`	1
`2`	2
`3`	3
`4`	4
`5`	5
`6`	6
`7`	7
`8`	8
`10`	10
`12`	12
`14`	14
`16`	16
`20`	20
`24`	24
`28`	28
`32`	32
`40`	40
`48`	48
`56`	56
`64`	64
`80`	80
`96`	96
`112`	112
`128`	128

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`	0

Visibility / conditions

{"condition_id": 339, "type": "SuppressIf", "offset": 355124, "expr": ["EqIdVal QuestionId: 0x1284, Value: 0x0"]}
{"condition_id": 340, "type": "GrayOutIf", "offset": 355150, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink

Record 906

ConfigTDP Turbo Activation Ratio

Firmware Value

Custom value for Turbo Activation Ratio.

Firmware help text

Custom value for Turbo Activation Ratio. Needs to be configured with valid values from LFM to Max Turbo. 0 means don't use custom value.

Form: Config TDP Configurations
Opcode: Numeric
Question ID: 0x325
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x78
Width: 1 byte(s)
Range: 0 to 255 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 339, "type": "SuppressIf", "offset": 355124, "expr": ["EqIdVal QuestionId: 0x1284, Value: 0x0"]}
{"condition_id": 340, "type": "GrayOutIf", "offset": 355150, "expr": ["EqIdVal QuestionId: 0x318, Value: 0x1"]}

Permalink