Firmware Menus

Advanced Debug Settings

Advanced Debug Settings firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x2820
Records: 25
Parents: Debug Settings
Path: Setup / Advanced / Debug Settings / Advanced Debug Settings / Setup / Advanced / Advanced / Debug Settings / Advanced Debug Settings

Record 1505

USB3 Type-C UFP2DFP Kernel/Platform Debug Support

Firmware Value

This BIOS option enables kernel and platform debug for USB3 interface over a UFP Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x557
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0xa
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled
`2`	No Change	Standard defaultManufacturing default

Permalink

Record 1506

USB DbC Enable Mode

Firmware Value

Disabled:Clear both USB2/3DBCEN USB2:Set USB2DBCEN USB3:Set USB3DBCEN Both:Set both USB2/3DBCEN No Change:Comply with HW value

Firmware help text

Disabled:Clear both USB2/3DBCEN USB2:Set USB2DBCEN USB3:Set USB3DBCEN Both:Set both USB2/3DBCEN No Change:Comply with HW value

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x558
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x73f
Width: 1 byte(s)
Range: 0 to 4 step 0

Value	Label	Markers
`0`	Disabled
`1`	USB2
`2`	USB3
`3`	Both
`4`	No Change	Standard defaultManufacturing default

Permalink

Record 1507

DCI Enable

Firmware Value

Determine if to enable DCI debug from host

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x559
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x73e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}
{"condition_id": 605, "type": "SuppressIf", "offset": 380196, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x0"]}

Permalink

Record 1508

PCH Trace Hub Enable Mode

Firmware Value

Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' if Trace Hub is used by target debugger software.

Firmware help text

Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' if Trace Hub is used by target debugger software. Note: If 'Host Debugger' is selected, Platform Debug Consent has to be ENABLED because DCI is one of the primary trace data output paths.

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x55a
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x714
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Target Debugger
`2`	Host Debugger

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}
{"condition_id": 606, "type": "GrayOutIf", "offset": 380239, "expr": ["EqIdVal QuestionId: 0x124D, Value: 0x1"]}

Permalink

Record 1509

PCH TH Mem Buffer Size 0

Firmware Value

Select size of memory region 0 buffer.

Firmware help text

Select size of memory region 0 buffer. Choose None/OS if OS-supported memory or trace forwarding is desired Note : Limit of total buffer size (PCH + CPU) is 512MB when iTBT disabled, 256MB when iTBT enabled

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x55b
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x715
Width: 1 byte(s)
Range: 0 to 6 step 0

Value	Label	Markers
`0`	None/OS	Standard defaultManufacturing default
`1`	1MB
`2`	8MB
`3`	64MB
`4`	128MB
`5`	256MB
`6`	512MB

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}
{"condition_id": 607, "type": "SuppressIf", "offset": 380289, "expr": ["EqIdVal QuestionId: 0x55A, Value: 0x0"]}

Permalink

Record 1510

PCH TH Mem Buffer Size 1

Firmware Value

Select size of memory region 1 buffer.

Firmware help text

Select size of memory region 1 buffer. Choose None/OS if OS-supported memory or trace forwarding is desired Note : Limit of total buffer size (PCH + CPU) is 512MB when iTBT disabled, 256MB when iTBT enabled

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x55c
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x716
Width: 1 byte(s)
Range: 0 to 6 step 0

Value	Label	Markers
`0`	None/OS	Standard defaultManufacturing default
`1`	1MB
`2`	8MB
`3`	64MB
`4`	128MB
`5`	256MB
`6`	512MB

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}
{"condition_id": 607, "type": "SuppressIf", "offset": 380289, "expr": ["EqIdVal QuestionId: 0x55A, Value: 0x0"]}

Permalink

Record 1511

CPU Trace Hub Enable Mode

Firmware Value

Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' if Trace Hub is used by target debugger software.

Firmware help text

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x55d
VarStore: SaSetup
VarStore GUID: 72C5E28C-7783-43A1-8767-FAD73FCCAFA4
Offset: 0x83
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Target Debugger
`2`	Host Debugger

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}

Permalink

Record 1512

CPU TH Mem Buffer Size 0

Firmware Value

Select size of memory region 0 buffer.

Firmware help text

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x55e
VarStore: SaSetup
VarStore GUID: 72C5E28C-7783-43A1-8767-FAD73FCCAFA4
Offset: 0x84
Width: 1 byte(s)
Range: 0 to 6 step 0

Value	Label	Markers
`0`	None/OS	Standard defaultManufacturing default
`1`	1MB
`2`	8MB
`3`	64MB
`4`	128MB
`5`	256MB
`6`	512MB

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}
{"condition_id": 608, "type": "SuppressIf", "offset": 380475, "expr": ["EqIdVal QuestionId: 0x55D, Value: 0x0"]}

Permalink

Record 1513

CPU TH Mem Buffer Size 1

Firmware Value

Select size of memory region 1 buffer.

Firmware help text

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x55f
VarStore: SaSetup
VarStore GUID: 72C5E28C-7783-43A1-8767-FAD73FCCAFA4
Offset: 0x85
Width: 1 byte(s)
Range: 0 to 6 step 0

Value	Label	Markers
`0`	None/OS	Standard defaultManufacturing default
`1`	1MB
`2`	8MB
`3`	64MB
`4`	128MB
`5`	256MB
`6`	512MB

Visibility / conditions

{"condition_id": 604, "type": "GrayOutIf", "offset": 380184, "expr": ["EqIdVal QuestionId: 0x2819, Value: 0x7", "Not"]}
{"condition_id": 608, "type": "SuppressIf", "offset": 380475, "expr": ["EqIdVal QuestionId: 0x55D, Value: 0x0"]}
{"condition_id": 609, "type": "SuppressIf", "offset": 380551, "expr": ["EqIdVal QuestionId: 0x124C, Value: 0x1"]}

Permalink

Record 1514

CPU Run Control

Firmware Value

Enable/Disable CPU Run Control Support; No Change : Comply with HW value

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x560
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x111
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled
`2`	No Change	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 610, "type": "SuppressIf", "offset": 380633, "expr": ["EqIdVal QuestionId: 0x124B, Value: 0x0"]}

Permalink

Record 1515

CPU Run Control Lock

Firmware Value

Enable/Disable CPU Run Control Lock

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x561
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x112
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 610, "type": "SuppressIf", "offset": 380633, "expr": ["EqIdVal QuestionId: 0x124B, Value: 0x0"]}
{"condition_id": 611, "type": "SuppressIf", "offset": 380681, "expr": ["EqIdVal QuestionId: 0x560, Value: 0x2"]}

Permalink

Record 1516

USB Overcurrent Override for VISA

Firmware Value

This option overrides USB Over Current enablement state that USB OC will be disabled after enabling this option.

Firmware help text

This option overrides USB Over Current enablement state that USB OC will be disabled after enabling this option. Enable when VISA pin is muxed with USB OC

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x562
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0xb
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 612, "type": "GrayOutIf", "offset": 380726, "expr": ["EqIdVal QuestionId: 0x124A, Value: 0x1"]}

Permalink

Record 1517

Processor trace memory allocation

Firmware Value

Disable or Select Processor trace memory region Size: from 4KB ~ 128MB

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x563
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x122
Width: 1 byte(s)
Range: 0 to 255 step 0

Value	Label	Markers
`255`	Disabled	Standard defaultManufacturing default
`0`	4KB
`1`	8KB
`2`	16KB
`3`	32KB
`4`	64KB
`5`	128KB
`6`	256KB
`7`	512KB
`8`	1MB
`9`	2MB
`10`	4MB
`11`	8MB
`12`	16MB
`13`	32MB
`14`	64MB
`15`	128MB

Visibility / conditions

{"condition_id": 613, "type": "SuppressIf", "offset": 380769, "expr": ["EqIdVal QuestionId: 0x1249, Value: 0x0"]}

Permalink

Record 1518

Processor trace

Firmware Value

Enable/Disable processor trace feature from CPU MSR.

Firmware help text

Enable/Disable processor trace feature from CPU MSR. Enabling this feature will immediately start trace collection.

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x564
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x123
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 614, "type": "SuppressIf", "offset": 380917, "expr": ["EqIdVal QuestionId: 0x1249, Value: 0x0", "EqIdVal QuestionId: 0x563, Value: 0xFF", "Or"]}

Permalink

Record 1519

Processor Trace OutPut Scheme

Firmware Value

Select Single Range Output scheme or ToPA table Output scheme

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x565
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x121
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Single Range Output	Standard defaultManufacturing default
`1`	ToPA Output

Visibility / conditions

{"condition_id": 614, "type": "SuppressIf", "offset": 380917, "expr": ["EqIdVal QuestionId: 0x1249, Value: 0x0", "EqIdVal QuestionId: 0x563, Value: 0xFF", "Or"]}

Permalink

Record 1520

SMM Processor Trace

Firmware Value

Enable/Disable usage of Processor Trace in SMM

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x566
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x22e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 614, "type": "SuppressIf", "offset": 380917, "expr": ["EqIdVal QuestionId: 0x1249, Value: 0x0", "EqIdVal QuestionId: 0x563, Value: 0xFF", "Or"]}

Permalink

Record 1521

JTAG C10 Power Gate

Firmware Value

When Enabled, JTAG is power gated in C10 state.

Firmware help text

When Enabled, JTAG is power gated in C10 state. When Disabled, keeps the JTAG power up during C10 and deeper power states for debug purpose.

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x567
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x8
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`1`	Disabled
`0`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 615, "type": "GrayOutIf", "offset": 381036, "expr": ["EqIdVal QuestionId: 0x1248, Value: 0x1"]}

Permalink

Record 1522

Three Strike Counter

Firmware Value

Enable/Disable Three Strike Counter

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x568
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x125
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`1`	Disabled
`0`	Enabled	Standard defaultManufacturing default

Permalink

Record 1523

CrashLog Feature

Firmware Value

The feature helps collecting crash data from PMC SSRAM

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x569
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x859
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 1524

CrashLog On All Reset

Firmware Value

Option to invoke CrashLog collection on all reset

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x56a
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x85a
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 616, "type": "SuppressIf", "offset": 381145, "expr": ["EqIdVal QuestionId: 0x569, Value: 0x0"]}

Permalink

Record 1525

CrashLog Rearm Enable

Firmware Value

Option to invoke crashlog re-arm

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x56b
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x85c
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 617, "type": "SuppressIf", "offset": 381188, "expr": ["EqIdVal QuestionId: 0x569, Value: 0x0"]}

Permalink

Record 1526

CrashLog Clear Enable

Firmware Value

Option to invoke CrashLog clear

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x56c
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x85b
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 618, "type": "SuppressIf", "offset": 381231, "expr": ["EqIdVal QuestionId: 0x569, Value: 0x0"]}

Permalink

Record 1527

CrashLog GPRs

Firmware Value

Helps collecting crash data from PMC SSRAM.

Firmware help text

Helps collecting crash data from PMC SSRAM. Enabling this may expose personal or confidential information that may be held in the GPRs at the time of the Crash trigger

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x56d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x314
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled
`2`	Gprs Enabled, Smm Gprs Disabled

Visibility / conditions

{"condition_id": 618, "type": "SuppressIf", "offset": 381231, "expr": ["EqIdVal QuestionId: 0x569, Value: 0x0"]}
{"condition_id": 619, "type": "SuppressIf", "offset": 381272, "expr": ["EqIdVal QuestionId: 0x1247, Value: 0x0", "EqIdVal QuestionId: 0x1246, Value: 0x670", "And"]}

Permalink

Record 1528

PMC Debug Message Enable

Firmware Value

When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW will never send debug meesages to trace hub.

Firmware help text

When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x56e
VarStore: PchSetup
VarStore GUID: 4570B7F1-ADE8-4943-8DC3-406472842384
Offset: 0x741
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Permalink

Record 1529

Delayed Authentication Mode

Firmware Value

Enable/Disable Delayed Authentication Mode

Form: Advanced Debug Settings
Opcode: OneOf
Question ID: 0x281a
VarStore: MeSetupStorage
VarStore GUID: 5432122D-D034-49D2-A6DE-65A829EB4C74
Offset: 0x9
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard default
`1`	Enabled

Visibility / conditions

{"condition_id": 620, "type": "GrayOutIf", "offset": 381367, "expr": ["EqIdVal QuestionId: 0x1245, Value: 0x1"]}

Permalink