Firmware Menus

Remote Platform Erase Configuration

Remote Platform Erase Configuration firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x27ff
Records: 2
Parents: AMT Configuration
Path: Setup / Advanced / AMT Configuration / Remote Platform Erase Configuration / Setup / Advanced / Advanced / AMT Configuration / Remote Platform Erase Configuration / Setup / Advanced / PCH-FW Configuration / AMT Configuration / Remote Platform Erase Configuration

Record 1427

Enable Remote Platform Erase Feature

Firmware Value

Enable/Disable Remote Platform Erase Feature

Form: Remote Platform Erase Configuration
Opcode: OneOf
Question ID: 0x518
VarStore: MeSetup
VarStore GUID: 5432122D-D034-49D2-A6DE-65A829EB4C74
Offset: 0x33
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 1428

SSD Erase Mode

Firmware Value

Change RPE SSD Erase Action behavior: Simulated: Performs RPE SSD Erase flow without erasing SSD Real: Erase SSD.

Firmware help text

Change RPE SSD Erase Action behavior: Simulated: Performs RPE SSD Erase flow without erasing SSD Real: Erase SSD. *** If SATA device is used, OEM could use SECURE_ERASE_HOOK_PROTOCOL to remove SATA power to skip G3 cycle. ***

Form: Remote Platform Erase Configuration
Opcode: OneOf
Question ID: 0x519
VarStore: MeSetup
VarStore GUID: 5432122D-D034-49D2-A6DE-65A829EB4C74
Offset: 0x34
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Simulated	Standard defaultManufacturing default
`1`	Real

Visibility / conditions

{"condition_id": 580, "type": "GrayOutIf", "offset": 377276, "expr": ["EqIdVal QuestionId: 0x518, Value: 0x0"]}

Permalink