CPU, Power, Memory

Processor

Processor firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x27ee
Records: 89
Parents: OverClocking Performance Menu
Children: Processor Disable
Path: Setup / Advanced / OverClocking Performance Menu / Processor / Setup / Advanced / Advanced / OverClocking Performance Menu / Processor

Record 1197

Per Core Disable Configuration

Firmware Value

Enable/Disable Per Core Disable.

Firmware help text

Enable/Disable Per Core Disable. When Per Core Disable Configuration is enabled, selction of Active Cores and Active Efficient-cores will be disabled.

Form: Processor
Opcode: OneOf
Question ID: 0x27e7
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x34c
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Permalink

Record 1198

Processor Disable

Menu Link

Processor Disable Control

Form: Processor
Opcode: Ref
Question ID: 0x438

Visibility / conditions

{"condition_id": 443, "type": "SuppressIf", "offset": 367631, "expr": ["EqIdVal QuestionId: 0x27E7, Value: 0x1", "Not"]}

Permalink

Record 1199

Core Ratio Extension Mode

Firmware Value

Enable / Disable Core Ratio Above 85 Extension Mode.

Firmware help text

Enable / Disable Core Ratio Above 85 Extension Mode. Enable - Max Overclocking Ratio Limit as specified by OCMB 0x1 command is 120; Disable - Max Overclocking Ratio Limit as specified by OCMB 0x1 command is 85.

Form: Processor
Opcode: OneOf
Question ID: 0x439
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1da
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 444, "type": "SuppressIf", "offset": 367660, "expr": ["EqIdVal QuestionId: 0x118C, Value: 0x1", "Not"]}

Permalink

Record 1200

Core Max OC Ratio

Firmware Value

Sets the maximum OC Ratio for the CPU Core.

Firmware help text

Sets the maximum OC Ratio for the CPU Core. Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range non-turbo max - 85 (Previously max turbo is 83).

Form: Processor
Opcode: Numeric
Question ID: 0x43a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1db
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Permalink

Record 1201

Per Core Ratio Override

Firmware Value

Enable / Disable Per Core Ratio Override.

Firmware help text

Enable / Disable Per Core Ratio Override. Enable - Set maximum OC ratio to specific core by OCMB 0x1D command; Disable - Set maximum OC ratio to all cores by OCMB command 0x11. Reminding: It's expeced we should manual change the

Form: Processor
Opcode: OneOf
Question ID: 0x43b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2bb
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Permalink

Record 1202

Core 0 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 0.

Form: Processor
Opcode: Numeric
Question ID: 0x43c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2bc
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}

Permalink

Record 1203

Core 1 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 1.

Form: Processor
Opcode: Numeric
Question ID: 0x43d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2bd
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 446, "type": "SuppressIf", "offset": 367798, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x2", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x2", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1204

Core 2 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 2.

Form: Processor
Opcode: Numeric
Question ID: 0x43e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2be
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 447, "type": "SuppressIf", "offset": 367859, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x3", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x3", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1205

Core 3 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 3.

Form: Processor
Opcode: Numeric
Question ID: 0x43f
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2bf
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 448, "type": "SuppressIf", "offset": 367920, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x4", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x4", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1206

Core 4 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 4.

Form: Processor
Opcode: Numeric
Question ID: 0x440
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2c0
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 449, "type": "SuppressIf", "offset": 367981, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x5", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x5", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1207

Core 5 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 5.

Form: Processor
Opcode: Numeric
Question ID: 0x441
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2c1
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 450, "type": "SuppressIf", "offset": 368042, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x6", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x6", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1208

Core 6 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 6.

Form: Processor
Opcode: Numeric
Question ID: 0x442
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2c2
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 451, "type": "SuppressIf", "offset": 368103, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x7", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x7", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1209

Core 7 Max Ratio

Firmware Value

Override current maximum OC Ratio for the CPU Core 7.

Form: Processor
Opcode: Numeric
Question ID: 0x443
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2c3
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 452, "type": "SuppressIf", "offset": 368164, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x8", "LessThan", "QuestionRef1 QuestionId: 0x22D", "Uint8 Value: 0x8", "LessThan", "EqIdVal QuestionId: 0x22D, Value: 0x0", "Not", "And", "Or"]}

Permalink

Record 1210

Cluster 0 Max Ratio

Firmware Value

Override Efficient-cores 0 - 3 Maximum OC Ratio, maximum value up to 120.Note.

Firmware help text

Override Efficient-cores 0 - 3 Maximum OC Ratio, maximum value up to 120.Note. E-cores 0 - 3 are in the same Cluster and their max core ratio will be aligned.

Form: Processor
Opcode: Numeric
Question ID: 0x444
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2b7
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 453, "type": "SuppressIf", "offset": 368225, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1211

Cluster 1 Max Ratio

Firmware Value

Override Efficient-cores 4 - 7 Maximum OC Ratio, maximum value up to 120.Note.

Firmware help text

Override Efficient-cores 4 - 7 Maximum OC Ratio, maximum value up to 120.Note. E-cores 4 - 7 are in the same Cluster and their max core ratio will be aligned.

Form: Processor
Opcode: Numeric
Question ID: 0x445
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2b8
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 454, "type": "SuppressIf", "offset": 368265, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1212

Cluster 2 Max Ratio

Firmware Value

Override Efficient-cores 8 - 11 Maximum OC Ratio, maximum value up to 120.Note.

Firmware help text

Override Efficient-cores 8 - 11 Maximum OC Ratio, maximum value up to 120.Note. E-cores 8 - 11 are in the same Cluster and their max core ratio will be aligned.

Form: Processor
Opcode: Numeric
Question ID: 0x446
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2b9
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 455, "type": "SuppressIf", "offset": 368305, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1213

Cluster 3 Max Ratio

Firmware Value

Override Efficient-cores 12 - 15 Maximum OC Ratio, maximum value up to 120.Note.

Firmware help text

Override Efficient-cores 12 - 15 Maximum OC Ratio, maximum value up to 120.Note. E-cores 12 - 15 are in the same Cluster and their max core ratio will be aligned.

Form: Processor
Opcode: Numeric
Question ID: 0x447
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2ba
Width: 1 byte(s)
Range: 0 to 120 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 445, "type": "SuppressIf", "offset": 367765, "expr": ["EqIdVal QuestionId: 0x43B, Value: 0x0"]}
{"condition_id": 456, "type": "SuppressIf", "offset": 368345, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1214

Core Voltage Mode

Firmware Value

Selects between Adaptive and Override Voltage modes.

Firmware help text

Selects between Adaptive and Override Voltage modes. In Override Mode the voltage selected will be applied over all operating frequencies. In Adaptive Mode the voltage is interpolated only in turbo mode. Uses Mailbox MSR 0x150, cmd 0x10, 0x11.

Form: Processor
Opcode: OneOf
Question ID: 0x448
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1dd
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Adaptive	Standard defaultManufacturing default
`1`	Override

Permalink

Record 1215

P-core Voltage Override

Firmware Value

Specifies the Override Voltage applied to the Performance-core domain.

Firmware help text

Specifies the Override Voltage applied to the Performance-core domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range 0-2000 mV.

Form: Processor
Opcode: Numeric
Question ID: 0x449
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1de
Width: 2 byte(s)
Range: 0 to 2000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 457, "type": "SuppressIf", "offset": 368420, "expr": ["EqIdVal QuestionId: 0x448, Value: 0x0"]}

Permalink

Record 1216

P-core Voltage Target Override

Firmware Value

Specifies the extra turbo voltage applied while Performance-core is operating in turbo mode.

Firmware help text

Specifies the extra turbo voltage applied while Performance-core is operating in turbo mode. Uses Mailbox MSR 0x150, cmd 0x10, 0x11. Range 0-2000 mV

Form: Processor
Opcode: Numeric
Question ID: 0x44a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1e3
Width: 2 byte(s)
Range: 0 to 2000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 458, "type": "SuppressIf", "offset": 368459, "expr": ["EqIdVal QuestionId: 0x448, Value: 0x1"]}

Permalink

Record 1217

VF Offset Mode

Firmware Value

Selects between Legacy and Selection modes.

Firmware help text

Selects between Legacy and Selection modes. Need Reset System after enabling OverClocking Feature to Initialize the default value. In Legacy Mode, setting a global offset for the entire VF curve. In Selection modes, setting a selected VF point.

Form: Processor
Opcode: OneOf
Question ID: 0x44b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x232
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Legacy	Standard defaultManufacturing default
`1`	Selection

Visibility / conditions

{"condition_id": 459, "type": "GrayOutIf", "offset": 368498, "expr": ["EqIdVal QuestionId: 0x1265, Value: 0x0"]}

Permalink

Record 1218

VF Configuration Scope

Firmware Value

Alows both all cores VF curve or per-core VF curve configuration.

Form: Processor
Opcode: OneOf
Question ID: 0x44c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x261
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	All-core	Standard defaultManufacturing default
`1`	Per-core

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}

Permalink

Record 1219

P-core Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Global Performance-core domain.

Firmware help text

Specifies the Offset Voltage applied to the Global Performance-core domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x44d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1e0
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 461, "type": "SuppressIf", "offset": 368582, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x1"]}

Permalink

Record 1220

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x44e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1e2
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 461, "type": "SuppressIf", "offset": 368582, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x1"]}

Permalink

Record 1221

P-core 0 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 0 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 0 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x44f
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x262
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 463, "type": "SuppressIf", "offset": 368662, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1222

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x450
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x272
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 463, "type": "SuppressIf", "offset": 368662, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1223

P-core 1 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 1 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 1 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x451
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x264
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 464, "type": "SuppressIf", "offset": 368739, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1224

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x452
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x273
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 464, "type": "SuppressIf", "offset": 368739, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1225

P-core 2 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 2 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 2 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x453
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x266
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 465, "type": "SuppressIf", "offset": 368816, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1226

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x454
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x274
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 465, "type": "SuppressIf", "offset": 368816, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1227

P-core 3 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 3 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 3 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x455
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x268
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 466, "type": "SuppressIf", "offset": 368893, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1228

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x456
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x275
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 466, "type": "SuppressIf", "offset": 368893, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1229

P-core 4 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 4 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 4 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x457
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x26a
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 467, "type": "SuppressIf", "offset": 368970, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x5", "LessThan"]}

Permalink

Record 1230

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x458
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x276
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 467, "type": "SuppressIf", "offset": 368970, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x5", "LessThan"]}

Permalink

Record 1231

P-core 5 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 5 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 5 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x459
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x26c
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 468, "type": "SuppressIf", "offset": 369047, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x6", "LessThan"]}

Permalink

Record 1232

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x45a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x277
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 468, "type": "SuppressIf", "offset": 369047, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x6", "LessThan"]}

Permalink

Record 1233

P-core 6 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 6 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 6 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x45b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x26e
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 469, "type": "SuppressIf", "offset": 369124, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x7", "LessThan"]}

Permalink

Record 1234

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x45c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x278
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 469, "type": "SuppressIf", "offset": 369124, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x7", "LessThan"]}

Permalink

Record 1235

P-core 7 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Performance-core 7 domain.

Firmware help text

Specifies the Offset Voltage applied to the Performance-core 7 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x45d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x270
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 470, "type": "SuppressIf", "offset": 369201, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x8", "LessThan"]}

Permalink

Record 1236

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x45e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x279
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 470, "type": "SuppressIf", "offset": 369201, "expr": ["QuestionRef1 QuestionId: 0x1267", "Uint8 Value: 0x8", "LessThan"]}

Permalink

Record 1237

Cluster 0 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Efficient-core Cluster 0 domain.

Firmware help text

Specifies the Offset Voltage applied to the Efficient-core Cluster 0 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x45f
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x315
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 471, "type": "SuppressIf", "offset": 369278, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1238

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x460
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x31d
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 471, "type": "SuppressIf", "offset": 369278, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1239

Cluster 1 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Efficient-core Cluster 1 domain.

Firmware help text

Specifies the Offset Voltage applied to the Efficient-core Cluster 1 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x461
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x317
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 472, "type": "SuppressIf", "offset": 369355, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1240

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x462
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x31e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 472, "type": "SuppressIf", "offset": 369355, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1241

Cluster 2 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Efficient-core Cluster 2 domain.

Firmware help text

Specifies the Offset Voltage applied to the Efficient-core Cluster 2 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x463
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x319
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 473, "type": "SuppressIf", "offset": 369432, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1242

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x464
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x31f
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 473, "type": "SuppressIf", "offset": 369432, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1243

Cluster 3 Voltage Offset

Firmware Value

Specifies the Offset Voltage applied to the Efficient-core Cluster 3 domain.

Firmware help text

Specifies the Offset Voltage applied to the Efficient-core Cluster 3 domain. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x465
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x31b
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 474, "type": "SuppressIf", "offset": 369509, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1244

Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x466
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x320
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 460, "type": "SuppressIf", "offset": 368541, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x1"]}
{"condition_id": 462, "type": "SuppressIf", "offset": 368654, "expr": ["EqIdVal QuestionId: 0x44C, Value: 0x0"]}
{"condition_id": 474, "type": "SuppressIf", "offset": 369509, "expr": ["QuestionRef1 QuestionId: 0x1266", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1245

VF Point 1 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 1.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 1. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x1. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x467
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x234
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 476, "type": "SuppressIf", "offset": 369598, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1246

VF Point 1 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x468
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x252
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 476, "type": "SuppressIf", "offset": 369598, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x1", "LessThan"]}

Permalink

Record 1247

VF Point 2 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 2.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 2. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x2. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x469
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x236
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 477, "type": "SuppressIf", "offset": 369683, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1248

VF Point 2 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x46a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x253
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 477, "type": "SuppressIf", "offset": 369683, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x2", "LessThan"]}

Permalink

Record 1249

VF Point 3 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 3.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 3. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x3. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x46b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x238
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 478, "type": "SuppressIf", "offset": 369768, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1250

VF Point 3 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x46c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x254
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 478, "type": "SuppressIf", "offset": 369768, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x3", "LessThan"]}

Permalink

Record 1251

VF Point 4 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 4.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 4. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x4. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x46d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x23a
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 479, "type": "SuppressIf", "offset": 369853, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1252

VF Point 4 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x46e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x255
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 479, "type": "SuppressIf", "offset": 369853, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x4", "LessThan"]}

Permalink

Record 1253

VF Point 5 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 5.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 5. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x5. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x46f
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x23c
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 480, "type": "SuppressIf", "offset": 369938, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x5", "LessThan"]}

Permalink

Record 1254

VF Point 5 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x470
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x256
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 480, "type": "SuppressIf", "offset": 369938, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x5", "LessThan"]}

Permalink

Record 1255

VF Point 6 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 6.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 6. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x6. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x471
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x23e
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 481, "type": "SuppressIf", "offset": 370023, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x6", "LessThan"]}

Permalink

Record 1256

VF Point 6 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x472
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x257
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 481, "type": "SuppressIf", "offset": 370023, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x6", "LessThan"]}

Permalink

Record 1257

VF Point 7 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 7.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 7. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x7. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x473
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x240
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 482, "type": "SuppressIf", "offset": 370108, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x7", "LessThan"]}

Permalink

Record 1258

VF Point 7 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x474
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x258
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 482, "type": "SuppressIf", "offset": 370108, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x7", "LessThan"]}

Permalink

Record 1259

VF Point 8 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 8.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 8. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x8. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x475
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x242
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 483, "type": "SuppressIf", "offset": 370193, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x8", "LessThan"]}

Permalink

Record 1260

VF Point 8 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x476
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x259
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 483, "type": "SuppressIf", "offset": 370193, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x8", "LessThan"]}

Permalink

Record 1261

VF Point 9 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 9.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 9. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0x9. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x477
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x244
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 484, "type": "SuppressIf", "offset": 370278, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x9", "LessThan"]}

Permalink

Record 1262

VF Point 9 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x478
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x25a
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 484, "type": "SuppressIf", "offset": 370278, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0x9", "LessThan"]}

Permalink

Record 1263

VF Point 10 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 10.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 10. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0xA. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x479
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x246
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 485, "type": "SuppressIf", "offset": 370363, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xA", "LessThan"]}

Permalink

Record 1264

VF Point 10 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x47a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x25b
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 485, "type": "SuppressIf", "offset": 370363, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xA", "LessThan"]}

Permalink

Record 1265

VF Point 11 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 11.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 11. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0xB. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x47b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x248
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 486, "type": "SuppressIf", "offset": 370448, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xB", "LessThan"]}

Permalink

Record 1266

VF Point 11 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x47c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x25c
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 486, "type": "SuppressIf", "offset": 370448, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xB", "LessThan"]}

Permalink

Record 1267

VF Point 12 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 12.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 12. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0xC. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x47d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x24a
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 487, "type": "SuppressIf", "offset": 370533, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xC", "LessThan"]}

Permalink

Record 1268

VF Point 12 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x47e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x25d
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 487, "type": "SuppressIf", "offset": 370533, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xC", "LessThan"]}

Permalink

Record 1269

VF Point 13 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 13.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 13. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0xD. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x47f
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x24c
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 488, "type": "SuppressIf", "offset": 370618, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xD", "LessThan"]}

Permalink

Record 1270

VF Point 13 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x480
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x25e
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 488, "type": "SuppressIf", "offset": 370618, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xD", "LessThan"]}

Permalink

Record 1271

VF Point 14 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 14.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 14. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0xE. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x481
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x24e
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 489, "type": "SuppressIf", "offset": 370703, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xE", "LessThan"]}

Permalink

Record 1272

VF Point 14 Offset Prefix

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x482
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x25f
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 489, "type": "SuppressIf", "offset": 370703, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xE", "LessThan"]}

Permalink

Record 1273

VF Point 15 Offset

Firmware Value

Specifies the Offset Voltage applied to the Selected VF Point 15.

Firmware help text

Specifies the Offset Voltage applied to the Selected VF Point 15. This voltage is specified in millivolts. Uses Mailbox MSR 0x150, cmd 0x11, Param1 0:Core 2:Ring, Param2 0xF. Range -500 to 500 mV

Form: Processor
Opcode: Numeric
Question ID: 0x483
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x250
Width: 2 byte(s)
Range: 0 to 1000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 490, "type": "SuppressIf", "offset": 370788, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xF", "LessThan"]}

Permalink

Record 1274

OneOf

Firmware Value

Sets the offset value as positive or negative.

Form: Processor
Opcode: OneOf
Question ID: 0x484
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x260
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	+	Standard defaultManufacturing default
`1`	-

Visibility / conditions

{"condition_id": 475, "type": "SuppressIf", "offset": 369590, "expr": ["EqIdVal QuestionId: 0x44B, Value: 0x0"]}
{"condition_id": 490, "type": "SuppressIf", "offset": 370788, "expr": ["QuestionRef1 QuestionId: 0x1265", "Uint8 Value: 0xF", "LessThan"]}

Permalink

Record 1275

AVX2 Ratio Offset

Firmware Value

AVX2 Ratio Offset.

Firmware help text

AVX2 Ratio Offset. Specifies number of bins to decrease AVX ratio vs. Core Ratio. AVX is a more stressful workload, it is helpful to lower the AVX ratio to ensure maximum possible ratio for SSE workloads. Uses Mailbox MSR 0x150, cmd 0x1B. Range 0 - 31. 0 = No offset.

Form: Processor
Opcode: Numeric
Question ID: 0x485
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1e5
Width: 1 byte(s)
Range: 0 to 31 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Permalink

Record 1276

AVX2 Voltage Guardband Scale Factor

Firmware Value

AVX2 Voltage Guardband Scale Factor.

Firmware help text

AVX2 Voltage Guardband Scale Factor. Controls the voltage guardband applied to AVX workloads. Range 0 - 200 in 1/100 units, where 125 = 1.25 scale factor. A default value of 100 applies the default voltage guardband scale factor of 1.0. A value > 100 will increase the votlage guardband, and < 100 will decrease the voltage guardband.

Form: Processor
Opcode: Numeric
Question ID: 0x486
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x225
Width: 1 byte(s)
Range: 0 to 200 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`100`

Permalink

Record 1277

TjMax Offset

Firmware Value

TjMax Offset.

Firmware help text

TjMax Offset. Specified value here is clipped by pCode (125 - TjMax Offset) to support TjMax in the range of 62 to 115 deg Celsius. Uses Mailbox MSR 0x37, command 0x01. Range 10 - 63. 0 = No offset.

Form: Processor
Opcode: Numeric
Question ID: 0x487
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x1f8
Width: 1 byte(s)
Range: 0 to 63 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Permalink

Record 1278

Thermal Velocity Boost

Firmware Value

This service controls Core frequency reduction caused by high package temperatures for processors that implement the Intel Thermal Velocity Boost (TVB) feature.

Firmware help text

This service controls Core frequency reduction caused by high package temperatures for processors that implement the Intel Thermal Velocity Boost (TVB) feature. It is required to be disabled for supporting overclocking at frequencies higher than the default max turbo frequency. Default is disabled. Uses Overclocking Mailbox command 0x18/0x19.

Form: Processor
Opcode: OneOf
Question ID: 0x488
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2e3
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Permalink

Record 1279

Down Bins (delta) for Temperature Threshold 0

Firmware Value

When running above Temperature Threshold 0, the ratio will be clipped to (Max_Ratio-This Down Bins value)

Form: Processor
Opcode: Numeric
Question ID: 0x489
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x34e
Width: 1 byte(s)
Range: 0 to 10 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`1`

Visibility / conditions

{"condition_id": 491, "type": "SuppressIf", "offset": 371019, "expr": ["EqIdVal QuestionId: 0x488, Value: 0x0"]}

Permalink

Record 1280

TVB Temperature Threshold 0 (degrees C)

Firmware Value

Running ABOVE this temperature will clip delta Down Bins for Threshold 0 from the resolved OC Ratio

Form: Processor
Opcode: Numeric
Question ID: 0x48a
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x34f
Width: 1 byte(s)
Range: 0 to 100 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`70`

Visibility / conditions

{"condition_id": 491, "type": "SuppressIf", "offset": 371019, "expr": ["EqIdVal QuestionId: 0x488, Value: 0x0"]}

Permalink

Record 1281

TVB Temperature Threshold 1 (degrees C)

Firmware Value

Running ABOVE this temperature will clip delta Down Bins for Threshold 1 from the resolved OC Ratio

Form: Processor
Opcode: Numeric
Question ID: 0x48b
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x350
Width: 1 byte(s)
Range: 0 to 100 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`100`

Visibility / conditions

{"condition_id": 491, "type": "SuppressIf", "offset": 371019, "expr": ["EqIdVal QuestionId: 0x488, Value: 0x0"]}

Permalink

Record 1282

Down Bins (delta) for Temperature Threshold 1

Firmware Value

When running above Temperature Threshold 1, the ratio will be clipped to (Max_Ratio-This Down Bins value)

Form: Processor
Opcode: Numeric
Question ID: 0x48c
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x351
Width: 1 byte(s)
Range: 0 to 10 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`2`

Visibility / conditions

{"condition_id": 491, "type": "SuppressIf", "offset": 371019, "expr": ["EqIdVal QuestionId: 0x488, Value: 0x0"]}

Permalink

Record 1283

TVB Voltage Optimizations

Firmware Value

This service controls thermal based voltage optimizations for processors that implement the Intel Thermal Velocity Boost (TVB) feature.

Firmware help text

This service controls thermal based voltage optimizations for processors that implement the Intel Thermal Velocity Boost (TVB) feature. Default is enabled. Uses Overclocking Mailbox command 0x18/0x19.

Form: Processor
Opcode: OneOf
Question ID: 0x48d
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x2e4
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 1284

Enhanced Thermal Velocity Boost

Firmware Value

If enabled the user will be clipped when the temperatures reach the default threshold on supported products.

Firmware help text

If enabled the user will be clipped when the temperatures reach the default threshold on supported products. Recommended to disable for overclocking.

Form: Processor
Opcode: OneOf
Question ID: 0x48e
VarStore: CpuSetup
VarStore GUID: B08F97FF-E6E8-4193-A997-5E9E9B0ADB32
Offset: 0x378
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Permalink

Record 1285

Expected CPU Freq

Record

Expected Processor frequency calculated using Bus ratio and Bus speed.

Form: Processor
Opcode: Action
Question ID: 0x27ef

Visibility / conditions

{"condition_id": 492, "type": "SuppressIf", "offset": 371195, "expr": ["EqIdVal QuestionId: 0x1264, Value: 0x0", "EqIdVal QuestionId: 0x1263, Value: 0x0", "Or"]}
{"condition_id": 493, "type": "SuppressIf", "offset": 371221, "expr": ["True"]}
{"condition_id": 494, "type": "SuppressIf", "offset": 371225, "expr": ["EqIdVal QuestionId: 0x1213, Value: 0xB"]}

Permalink