Firmware Menus

ACPI D3Cold settings

ACPI D3Cold settings firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x27e1
Records: 25
Parents: Advanced
Path: Setup / Advanced / ACPI D3Cold settings / Setup / Advanced / Advanced / ACPI D3Cold settings

Record 1080

ACPI D3Cold Support

Firmware Value

Enable/Disable ACPI D3Cold support to be executed on D3 entry and exit Note: Disable it would affect the Storage D3 setting

Firmware help text

Enable/Disable ACPI D3Cold support to be executed on D3 entry and exit Note: Disable it would affect the Storage D3 setting

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x27d8
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x703
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Permalink

Record 1081

VR Ramp up delay

Firmware Value

Delay between subsequent VR ramp ups if they are all Turn ON at the same time

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3c8
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x70f
Width: 2 byte(s)
Range: 0 to 100 step 16

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`16`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1082

PCIE Slot 5 Device Power-on delay in ms

Firmware Value

Delay between applying core power and Deasserting PERST#

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3c9
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x704
Width: 1 byte(s)
Range: 0 to 200 step 16

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`100`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1083

Audio Delay

Firmware Value

Delay after applying power to HD Audio(Realtek) codec device.

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3ca
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x707
Width: 2 byte(s)
Range: 0 to 1000 step 16

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`200`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 399, "type": "SuppressIf", "offset": 362760, "expr": ["EqIdVal QuestionId: 0x1D, Value: 0x0"]}

Permalink

Record 1084

SensorHub

Firmware Value

Delay after applying power to SensorHub device.

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3cb
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x70d
Width: 2 byte(s)
Range: 0 to 1000 step 16

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`68`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1085

TouchPad

Firmware Value

Delay after applying power to TouchPad device.

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3cc
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x709
Width: 2 byte(s)
Range: 0 to 1000 step 16

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`68`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1086

TouchPanel

Firmware Value

Delay in PR _ON after applying power to TouchPanel device.

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3cd
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x70b
Width: 2 byte(s)
Range: 0 to 1000 step 16

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`68`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1087

P-state Capping

Firmware Value

Set _PPC and send ACPI notification

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3ce
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x711
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1088

USB Port 1

Firmware Value

USB RTD3 support.

Firmware help text

USB RTD3 support. Super Speed : USB3.0 devices will be exposed as RTD3 capable. High Speed: USB2.0 devices will be exposed as RTD3 capable. Disabled : USB RTD3 support disabled. For SawtoothPeak USB Port1(Below) is Superspeed and Port2(Top) is HighSpeed. Check respective board configuration to know about USB port position.

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3cf
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x705
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`1`	High Speed
`2`	Super Speed
`0`	Disabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1089

USB Port 2

Firmware Value

USB RTD3 support.

Firmware help text

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d0
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x706
Width: 1 byte(s)
Range: 0 to 4 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	High Speed
`2`	Super Speed
`4`	Super Speed WWAN

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1090

ZPODD

Firmware Value

Zero Power ODD option is applicable only for the board with ZPODD support.

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d1
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x713
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 401, "type": "SuppressIf", "offset": 363016, "expr": ["EqIdVal QuestionId: 0x126D, Value: 0x1"]}

Permalink

Record 1091

WWAN

Firmware Value

Enable/Disable RTD3 support for WWAN

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d2
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x714
Width: 1 byte(s)
Range: 0 to 3 step 0

Value	Label	Markers
`0`	Disabled
`1`	D0/L1.2
`3`	D3/L2	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 402, "type": "GrayOutIf", "offset": 363059, "expr": ["EqIdVal QuestionId: 0x220, Value: 0x0"]}

Permalink

Record 1092

Sata Port 0

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d3
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x715
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1093

Sata Port 1

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d4
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x716
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1094

Sata Port 2

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d5
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x717
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1095

Sata Port 3

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d6
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x718
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1096

Sata Port 4

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d7
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x719
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1097

Sata Port 5

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d8
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x71a
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1098

Sata Port 6

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3d9
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x71b
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1099

Sata Port 7

Firmware Value

Setup option to control the SATA port RTD3 functionality

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3da
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x71c
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}

Permalink

Record 1100

DTBT RTD3 Enable

Firmware Value

Enables or Disables DTBT RTD3 support

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3db
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x9a1
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 403, "type": "SuppressIf", "offset": 363373, "expr": ["EqIdVal QuestionId: 0x2804, Value: 0x1", "Not"]}
{"condition_id": 404, "type": "GrayOutIf", "offset": 363385, "expr": ["EqIdVal QuestionId: 0x2809, Value: 0x2", "Not"]}

Permalink

Record 1101

TBT Power-off delay Optimization

Firmware Value

Enables or Disables TBT Power-off delay Optimization support

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3dc
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0xaca
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 403, "type": "SuppressIf", "offset": 363373, "expr": ["EqIdVal QuestionId: 0x2804, Value: 0x1", "Not"]}
{"condition_id": 405, "type": "SuppressIf", "offset": 363432, "expr": ["EqIdVal QuestionId: 0x3DB, Value: 0x1", "Not"]}

Permalink

Record 1102

TBT Power-off delay in ms

Firmware Value

Specify delay in ms necessary after removing TBT power

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3dd
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x9a2
Width: 2 byte(s)
Range: 0 to 15000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`5000`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 403, "type": "SuppressIf", "offset": 363373, "expr": ["EqIdVal QuestionId: 0x2804, Value: 0x1", "Not"]}
{"condition_id": 405, "type": "SuppressIf", "offset": 363432, "expr": ["EqIdVal QuestionId: 0x3DB, Value: 0x1", "Not"]}

Permalink

Record 1103

DTBT RTD3 CLKREQ Enable

Firmware Value

Enables or Disables DTBT RTD3 CLKREQ mask

Form: ACPI D3Cold settings
Opcode: OneOf
Question ID: 0x3de
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x9a4
Width: 4 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 403, "type": "SuppressIf", "offset": 363373, "expr": ["EqIdVal QuestionId: 0x2804, Value: 0x1", "Not"]}
{"condition_id": 405, "type": "SuppressIf", "offset": 363432, "expr": ["EqIdVal QuestionId: 0x3DB, Value: 0x1", "Not"]}

Permalink

Record 1104

DTBT RTD3 CLKREQ Delay value

Firmware Value

Specify delay in ms necessary after CLKREQ mask state is changed.

Form: ACPI D3Cold settings
Opcode: Numeric
Question ID: 0x3df
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x9a8
Width: 2 byte(s)
Range: 0 to 2000 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 398, "type": "SuppressIf", "offset": 362698, "expr": ["EqIdVal QuestionId: 0x27D8, Value: 0x0"]}
{"condition_id": 403, "type": "SuppressIf", "offset": 363373, "expr": ["EqIdVal QuestionId: 0x2804, Value: 0x1", "Not"]}
{"condition_id": 405, "type": "SuppressIf", "offset": 363432, "expr": ["EqIdVal QuestionId: 0x3DB, Value: 0x1", "Not"]}

Permalink