Onboard Devices

Serial IO Finger Print Settings

Serial IO Finger Print Settings firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x27bd
Records: 6
Parents: Serial IO SPI1 Settings, Serial IO SPI2 Settings
Path: Setup / Chipset / PCH-IO Configuration / SerialIo Configuration / Serial IO SPI1 Settings / Serial IO Finger Print Settings / Setup / Chipset / PCH-IO Configuration / SerialIo Configuration / Serial IO SPI2 Settings / Serial IO Finger Print Settings

Record 4632

Finger Print Sensor

Firmware Value

Select the HID to enable Finger Print Sensor

Form: Serial IO Finger Print Settings
Opcode: OneOf
Question ID: 0x1107
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x5ee
Width: 1 byte(s)
Range: 0 to 6 step 0

Value	Label	Markers
`0`	Disabled
`1`	FPC1011
`2`	FPC1020
`3`	VFSI6101
`4`	Synaptics VFSI7500
`5`	EGIS0300
`6`	FPC1021

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`	Disabled

Permalink

Record 4633

Finger Print Interrupt Mode

Firmware Value

Selects different routing for interrupts from Finger Print

Form: Serial IO Finger Print Settings
Opcode: OneOf
Question ID: 0x1108
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x5ef
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	GPIO Interrupt
`1`	APIC Interrupt	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 1830, "type": "SuppressIf", "offset": 526772, "expr": ["EqIdVal QuestionId: 0x1107, Value: 0x0"]}

Permalink

Record 4634

D0->D3 idle timeout (screen off)

Firmware Value

Default: 200 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Firmware help text

Default: 200 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Form: Serial IO Finger Print Settings
Opcode: Numeric
Question ID: 0x1109
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x6a4
Width: 2 byte(s)
Range: 1 to 10000 step 0

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`200`

Visibility / conditions

{"condition_id": 1831, "type": "SuppressIf", "offset": 526824, "expr": ["EqIdVal QuestionId: 0x1039, Value: 0x0"]}

Permalink

Record 4635

D0->D3 idle timeout (screen on)

Firmware Value

Default: 2000 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Firmware help text

Default: 2000 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Form: Serial IO Finger Print Settings
Opcode: Numeric
Question ID: 0x110a
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x6a6
Width: 2 byte(s)
Range: 1 to 10000 step 0

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`2000`

Visibility / conditions

{"condition_id": 1831, "type": "SuppressIf", "offset": 526824, "expr": ["EqIdVal QuestionId: 0x1039, Value: 0x0"]}

Permalink

Record 4636

D0->D3 idle timeout (screen off)

Firmware Value

Default: 200 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Firmware help text

Default: 200 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Form: Serial IO Finger Print Settings
Opcode: Numeric
Question ID: 0x110b
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x6a8
Width: 2 byte(s)
Range: 1 to 10000 step 0

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`200`

Visibility / conditions

{"condition_id": 1833, "type": "SuppressIf", "offset": 526920, "expr": ["EqIdVal QuestionId: 0x1039, Value: 0x0"]}

Permalink

Record 4637

D0->D3 idle timeout (screen on)

Firmware Value

Default: 2000 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Firmware help text

Default: 2000 [DEC] Minimum: 1 [DEC] Maximum: 10000 [DEC]

Form: Serial IO Finger Print Settings
Opcode: Numeric
Question ID: 0x110c
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x6aa
Width: 2 byte(s)
Range: 1 to 10000 step 0

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`2000`

Visibility / conditions

{"condition_id": 1833, "type": "SuppressIf", "offset": 526920, "expr": ["EqIdVal QuestionId: 0x1039, Value: 0x0"]}

Permalink