Firmware Menus

WWAN Configuration

WWAN Configuration firmware setup page decoded from AMI HII/IFR resources.

Form ID: 0x2723
Records: 6
Parents: Connectivity Configuration
Path: Setup / Advanced / Connectivity Configuration / WWAN Configuration / Setup / Advanced / Advanced / Connectivity Configuration / WWAN Configuration

Record 596

WWAN Device

Firmware Value

Select the M.2 WWAN Device options to enable 4G - 7360/7560 (Intel), 5G - M80 (MediaTek) Modems

Form: WWAN Configuration
Opcode: OneOf
Question ID: 0x220
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x820
Width: 1 byte(s)
Range: 0 to 2 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	4G - 7360/7560
`2`	5G - M80

Permalink

Record 597

Firmware Flash Device

Firmware Value

Enable or Disable WWAN Firmware Flash Device

Form: WWAN Configuration
Opcode: OneOf
Question ID: 0x221
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0xade
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled	Standard defaultManufacturing default
`1`	Enabled

Visibility / conditions

{"condition_id": 164, "type": "SuppressIf", "offset": 339714, "expr": ["EqIdVal QuestionId: 0x220, Value: 0x0"]}

Permalink

Record 598

Wireless CNV Config Device

Firmware Value

Enable or Disable WCCD ACPI device node

Form: WWAN Configuration
Opcode: OneOf
Question ID: 0x222
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0xb54
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 164, "type": "SuppressIf", "offset": 339714, "expr": ["EqIdVal QuestionId: 0x220, Value: 0x0"]}

Permalink

Record 599

WWAN Reset Workaround

Firmware Value

Enabling this workardound will result in BIOS asserting FULL_CARD_POWER_OFF#, PERST# and RESET# WWAN signals before the WWAN Device Power-On Sequence is executed.

Firmware help text

Enabling this workardound will result in BIOS asserting FULL_CARD_POWER_OFF#, PERST# and RESET# WWAN signals before the WWAN Device Power-On Sequence is executed. Disabling it has no impact.

Form: WWAN Configuration
Opcode: OneOf
Question ID: 0x223
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0x870
Width: 1 byte(s)
Range: 0 to 1 step 0

Value	Label	Markers
`0`	Disabled
`1`	Enabled	Standard defaultManufacturing default

Visibility / conditions

{"condition_id": 165, "type": "SuppressIf", "offset": 339790, "expr": ["EqIdVal QuestionId: 0x220, Value: 0x0"]}

Permalink

Record 600

WA - WWAN OEM SVID

Firmware Value

WWAN OEM Sub-Vendor ID

Form: WWAN Configuration
Opcode: Numeric
Question ID: 0x224
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0xb3a
Width: 2 byte(s)
Range: 0 to 65535 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`7416`

Visibility / conditions

{"condition_id": 166, "type": "SuppressIf", "offset": 339833, "expr": ["EqIdVal QuestionId: 0x220, Value: 0x2", "Not"]}

Permalink

Record 601

WA - WWAN SVID Detect Timeout

Firmware Value

The timeout value (ms) for detecting WWAN OEM SVID.

Firmware help text

The timeout value (ms) for detecting WWAN OEM SVID. Please notice it's workaround for OEM only.

Form: WWAN Configuration
Opcode: Numeric
Question ID: 0x225
VarStore: Setup
VarStore GUID: EC87D643-EBA4-4BB5-A1E5-3F3E36B20DA9
Offset: 0xb3c
Width: 2 byte(s)
Range: 0 to 65535 step 1

Default store records

Store ID	Store label	Value	Option label
`0`	Standard	`0`

Visibility / conditions

{"condition_id": 166, "type": "SuppressIf", "offset": 339833, "expr": ["EqIdVal QuestionId: 0x220, Value: 0x2", "Not"]}

Permalink